Shopping Cart

Your Cart is currently empty.


ENVE M730/Chris King E-MTB Wheelset

Image of ENVE M730/Chris King E-MTB Wheelset
ENVE M730/Chris King E-MTB Wheelset
ENVE M730/Chris King E-MTB Wheelset
ENVE M730/Chris King E-MTB Wheelset
ENVE M730/Chris King E-MTB Wheelset

Click on image to enlarge

ENVE M730/Chris King E-MTB Wheelset

CK Colour
Wheel Size
Bearing Type
Front Axle Type
Freehub Body
Tubeless Sealant
Add to Cart

A wheel that is the perfect complement to your electric assist mountain bike

The ENVE M Series M730 Rim - Say goodbye to heavy, expensive, challenging to install, ride compromising tyre inserts that are designed to help eliminate pinch flats and rim damage but ultimately fail to deliver on the promise. ENVE's protective rim strip is made using a specially formulated material that acts as an extremely durable bumper between unforgiving obstacles in the trail and durable carbon fibre. The result is the near elimination of "pinch" or "snake bite" flat tyres. Consequently, most carbon rims are broken and damaged after the tyre has lost air pressure and the tyre's air pressure is no longer offering protection to the rim. The ENVE promise is that their patent pending rim strip technology will result is less flat tyres, fewer damaged rims and more time riding how you want. That is with no limitations . . .

Application: EMTB, Enduro & Downhill
Designed for bikes with 130-180mm travel
Tyre width: 2.3in – 2.5in wide
Internal rim width: 30mm
External rim width: 36mm
Rim depth: 27mm
Includes tubeless protective rim strip for pinch-flat protection
32 moulded spoke holes per rim
Rim weight: 492g

Chris King Centerlock Boost Disc Hubs - Chris King Boost Centerlock hubs (110 x 15 front/148 x 12 rear) are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost Centerlock hubs have heavy-duty bearing seals and a threaded driveshell seal ring.

Our bearings, available in steel and ceramic, have heat-treated, surgical-grade steel races that are machined simultaneously to ensure perfectly matched inner and outer races. The quality and speed of our bearings are what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing races break-in they get faster with age. All our hubs and bearings are fully serviceable for years upon years of demanding use.

The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound.

Engineered, manufactured, and assembled in Portland, Oregon USA
King Lifetime Warranty
Canted flanges for stronger wheel builds
Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement
Legendary made-in-house bearings
Available with Micro Spline, HG or XD driveshell
Easily serviceable with a T10 Torx and pick or pen knife
Ceramic bearing upgrade available
Specifically designed for "BOOST" 148mm x 12mm axle standard

Sapim Force Black Spokes - The Sapim Force combines the advantages of the Race and the Strong models. The thicker bend diameter of 2.18 mm makes the spoke in this area especially strong. The 1.8 mm in the middle section with a strength of 1,400 N/mm2 offer a good elasticity and reduce the weight. The 2 mm diameter at the thread end make it possible to use a huge variety of nipples.

32 spokes 2x front and rear

Covered by ENVE Factory Limited Warranty & Incidental Damage Protection Programme

Supplied with ENVE tubeless rim strip and valves