OK

Shopping Cart

Your Cart is currently empty.

 
loading..
 
 
 

ENVE M640 27.5 Chris King MTB Wheelset

 
Image of ENVE M640 27.5 Chris King MTB Wheelset
ENVE M640 27.5 Chris King MTB Wheelset
ENVE M640 27.5 Chris King MTB Wheelset
ENVE M640 27.5 Chris King MTB Wheelset
ENVE M640 27.5 Chris King MTB Wheelset
 

Click on image to enlarge

ENVE M640 27.5 Chris King MTB Wheelset

CK Colour
 
 
Bearing Type
 
 
Front Axle Type
 
 
Freehub Body
 
 
Tubeless Sealant
 
 
Centre Lock to ISO 6 Bolt Adaptor
 
 
£2,995.00
 
Add to Cart

The ENVE M Series M640 Rim - Wide Hookless Bead is part of ENVE's Dynamic Impact Designed which was born to solve the problems associated with carbon rim designs. Traditional hookless rims are strong, stiff, reliably tubeless and light but require more material for strength, tend to ride harsh, and are susceptible to pinch flatting tyres. Once the tyre has flatted, there is nothing but the rubber itself to absorb impact energy for the trail. Unfortunately a pinch flat is often the precursor to a damaged carbon rim. Dynamic Impact Design by ENVE aims to solve this problem.

Application: Trail & Enduro
Designed for bikes with 100-160mm travel
Tyre width: 2.8in – 3.2in wide
Internal rim width: 40mm
External rim width: 49mm
Rim depth: 25mm
28 moulded spoke holes per rim
Rim weight: 450g

Chris King Centerlock Disc Hubs - Chris King Boost Centerlock hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost Centerlock hubs have heavy-duty bearing seals and a threaded driveshell seal ring.

Our bearings, available in steel and ceramic, have heat-treated, surgical-grade steel races that are machined simultaneously to ensure perfectly matched inner and outer races. The quality and speed of our bearings are what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing races break-in they get faster with age. All our hubs and bearings are fully serviceable for years upon years of demanding use.

The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound.

Engineered, manufactured, and assembled in Portland, Oregon USA
King Lifetime Warranty
Canted flanges for stronger wheel builds
Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement
Legendary made-in-house bearings
24h, 28h, and 32h
Available with Micro Spline, HG or XD driveshell
Easily serviceable with a T10 Torx and pick or pen knife
Ceramic bearing upgrade available
Specifically designed for "BOOST" 148mm x 12mm axle standard

Sapim CX Ray Black Spokes - As light as a titanium spoke, the CX-Ray still receives the best results in fatigue testing of any spoke. Its unique strength and flexibility make the CX-Ray suitable for most bicycle disciplines. The middle section of the spoke is drawn then pressed in a special mould to form its specific profile. CX-Ray spokes are used by top bike racers and triathletes around the world. Even downhillers use them, recognizing their strength and flexibility. Special alloy treatment and sophisticated production make this all possible.

28 spokes 2x front and rear

Supplied with tubeless rim tape and valves

Covered by ENVE Lifetime Incident Protectionhttps://www.enve.com/en/support/warranty/